Total : 0
BL-90 Series
Brushless DC Motor BL-90 Series
BL90 series - Specification of Motor
| Motor Model |  |
 |
 |
|||
| BL90X | BL90S | BL90N | ||||
| Rated Voltage | 24VDC | 1ø110VAC±10% | 24VDC | 1ø110VAC±10% | 24VDC | 1ø110VAC±10% |
| 1ø220VAC±10% | 1ø220VAC±10% | 1ø220VAC±10% | ||||
| Rated Power | 75W | 150W | 200W | |||
| Rated Torque | 2.4kg-cm | 5.6kg-cm | 6.4kg-cm | |||
| Rated Current | 3.6A | 2.1A / 1.1A | 8A | 3.7A / 1.9A | 8.0A | 4.7A / 2.6A |
| Rated Speed | 3000rpm | |||||
| Slot-Pole | 8P12S | |||||
| Degree of Protection | IP54 | |||||
| Motor Model |  |
 |
||
| BL90M | BL90L | |||
| Rated Voltage | 24VDC | 1ø110VAC±10% | 24VDC | 1ø110VAC±10% |
| 1ø220VAC±10% | 1ø220VAC±10% | |||
| Rated Power | 1350W | 500W | ||
| Rated Torque | 11.2kg-cm | 16kg-cm | ||
| Rated Current | 17.5A | 6.5A / 3.5A | 12A | 10.5A / 4.7A |
| Rated Speed | 3000rpm | |||
| Slot-Pole | 8P12S | |||
| Degree of Protection | IP54 | |||
Motor Characteristic Curve
| BL90X / 24VDC | BL90S / 220VAC |
 |
 |
| BL90N / 220VAC | BL90M / 220VAC |
 |
 |
| BL90L / 220VAC |
 |
BL90 series - Outline Dimension Drawing
| Motor | |
| Model | Length |
| BL90X | 52.5mm |
| BL90S | 62.5mm |
| BL90N | 72.5mm |
| BL90M | 87.5mm |
| BL90L | 112.5mm |
BL90 series - Gearbox 5GB Type
| Motor | |
| Model | Length (L1) |
| BL90S | 62.5mm |
| BL90M | 87.5mm |
| Gearbox 5GB34 | |
| Gear Ratio | Length (L2) |
| 5 / 10 / 15 | 57mm |
| 20 / 30 / 50 | 69.5mm |
| 100:1 | 80mm |
Specification of Gearbox
| BL90-5GB34 | |||||||
| Gear Ratio | 1:5 | 1:10 | 1:15 | 1:20 | 1:30 | 1:50 | 1:100 |
| N-M(kg-cm) (Permissible Torque) |
15(150) | 20(200) | 35(350) | ||||
| N(kg) (Permissible Thrust Load) |
100(10) | ||||||
| N(kg) (Permissible Overhung Load) |
300(30) | ||||||
BL90 series - Gearbox 5GU Type
| Motor | |
| Model | Length (L1) |
| BL90X | 52.5mm |
| BL90S | 62.5mm |
| BL90N | 72.5mm |
| Gearbox 5GU | |
| Gear Ratio | Length (L2) |
| 1:3~1:180 | 65mm |
Specification of Gearbox
| BL90-5GU | |||||||
| Gear Ratio | 1:5 | 1:10 | 1:15 | 1:20 | 1:25 | 1:30 | 1:40 |
| N-M(kg-cm) (Permissible Torque) |
3.5(35) | 7(73) | 10(97) | 13(130) | 15(150) | 18(180) | 20(200) |
| Gear Ratio | 1:50 | 1:75 | 1:90 | 1:100 | 1:120 | 1:150 | 1:180 |
| N-M(kg-cm) (Permissible Torque) |
20(200) | ||||||
